ACH - Acoustic Ceiling Hangers

Available in two sizes for loads from 5 kg to 100 kg, these flexible hangers may be inserted into a wire tie, drop rod or a strut type support to an acoustic ceiling.

The natural rubber element provides a high degree of isolation of the higher frequencies of vibration and audible noise, effectively decoupling mass ceilings from the building structure.

The ACH may also be used to reduce noise transmission from air conditioning equipment suspended in the ceiling void.


Design Features:

  • Zinc plated metal parts.
  • Rubber inserts for high frequency attenuation.
  • Hangers supplied with failsafe steel overload washers.
  • Hangers have natural rubber elements with deflections up to 3.5 mm.
  • Capable of up to 15° angular misalignment.
  • Can be fitted into a wire tie, drop rod or a strut type support to an acoustic ceiling.
  • Typical force isolation at maximum load at 125 Hz of 40 dB to 46 dB.

Typical Applications:
  • Acoustic Ceilings.
  • Pipework.
  • Axial Fans and Fan Coil Units.
  • Ductwork and Attenuators.
  • Exhaust Systems.

PDF Downloads: Download Acrobat Reader - This link will open in a new window

ACH Acoustic Ceiling Hangers